Basic Motorcycle Maintenance Checks You Should Definitely Know

If you own a motorcycle or want to buy one, there are a few things you should be aware of. These suggestions will not only assist you in learning more about your machine, but they will also assist you in ensuring that your beauty lasts longer and is free of problems. Motorcycles, like vehicles, require routine maintenance, and doing basic maintenance checks will keep your service fees to a minimal while also obviating the need for costly repairs.

We as a leading vintage motorcycle parts manufacturer sharing some important tips here -

Service regularly

Service your motorcycle at an authorized service center. The optimal period for service is specified in the owner's manual, so make sure you consult it before attempting any of the more difficult jobs. Most important adjustments, such as oil and coolant, should be covered by the service. Servicing your motorcycle adds to the worth of the bike by keeping expensive repairs to a bare minimum.

Wash your motorcycle regularly

A well-maintained motorcycle isn't complete without a spotless exterior. Before you ride, make sure the motorcycle is clean and in good condition. Even after years of wear and tear, you can maintain your bike looking like new by employing simple tactics. To keep the paint on the motorcycle in good condition, use polish and wax

Check the lights and horn

The lights and horn, as well as other electrical components, may be damaged as a result of repeated usage, especially when it rains. If the throw isn't as large as it used to be, check the lights for proper illumination and replace the bulb within the headlight unit. You could also upgrade to brighter bulbs to improve road visibility. Check for any loose wires or faulty horn components. The same can be replaced for a very low price.

Check the wear and tear on brakes

It is undeniable that getting the brakes incorrect is a matter of life and death. It is preferable to inspect the brake pads at regular intervals for your safety. Most modern brakes have discs, and the brake pads wear out after a long period of use. Once you see the brake pads are worn out, you'll need to replace them. A small investment now will save you a lot of money later on when you need to replace the entire disc brake unit.

Clean the air filter

After a period of time, the air filter will become clogged, preventing air from reaching the engine. As a result, the engine's performance suffers and the burden on it grows. Depending on your schedule, clean the air filter on a monthly basis. If the air filter is excessively blocked, it is better to replace it with a new one. The air filter is easily accessible, and it may be removed and replaced. For more information, consult the owner's handbook.

Check the battery regularly

The battery requires the utmost attention and care; else, it will become a very costly problem. If you're not sure how to handle it, get guidance from a knowledgeable rider or a mechanic who can show you how to handle batteries. Before you begin your ride, check for any battery leaks or blown fuses. Remove the battery and store it on a wooden or cardboard surface if you aren't going to use the motorcycle.

Replace the engine oil 

Oil changes are incredibly necessary and simple to perform. The engine is lubricated with oil, which decreases friction between its components. Most modern motorbikes include a dipstick that displays the maximum and minimum oil levels in the bike. Keep an eye on it and top up the oil when it reaches the minimum amount. Engine oil should be changed every 3 months, depending on how much you ride.

We also manufacture vintage Yamaha motorcycle parts with some more majority of motorcycle brands available in the world,